Cummins INLINE 5 INSITE 7.6 Data Link Adapter

Cummins INSITE 7.6 is a PC-based software application.It can easily access to users’ engine’s electronic performance information , which enables faster service turn around times. INSITE helps to ensure accurate procedures and diagnosis and limit downtime, while increasing productivity and profits.

Cummins INLINE 5 software provides the information of engine quickly, and users can get the inside details they need. No matter what kind of equipment you run, Cummins INSITE 7.6 can fit all Cummins electronic engine,no matter what equipment you run.

Cummins INSITE 7.6 supports multi-languages,such as English(UnitedStates),Chinese(Simplified),Danish,Dutch(Netherlands),Finnish,French(France),German(Germany),Italian(ltaly),Japanese,Korean,Norwegia(Bokmal),Portuguese(Brazil),Ruaaian,Spanish(Traditional Sort),Swedish and Turkish.

About the functions of the Cummins INSITE 7.6:

1.Trip and vehicle information

2.Parameter and feature adjustment

3.The accurate problem diagnosis

4.Complete wiring diagram sand sensor location maps

5.Step-by-step trouble-shooting information

6.Fault tree information

7.Fault code and symptom-based diagnostics

8.Engine diagnostic tests

9.Tools to create templates for a group of vehicles

10.Fleet management/driver reward programs

11.Audit trail information

12.Enhanced ECM security

The Cummins INSITE 7.6 is small enough to be put in your pocketm,the housing of it is made of aluminum so it can be protect well.It supports SAE J1708/J1587 and J1939/CAN data links,USB full speed port at up to 2M baud rate and RS-232 PC/PDA serial port at up to 115.2k baud rate.It is fully compliant with TMC’s RP1210 standard.

The operating temperature of Cummins INSITE 7.6 is rated for -40° to +85° C.It needs 8 V to 50 V DC power from vehicle.It includes advanced processor for maximum speed and performance,it also has 5 LED to indicate power and USB, RS-232, J1708/J1587, and J1939/CAN communications.The internal flash memory of it allows firmware upgradeability.

Posted in Uncategorized | Tagged | Leave a comment


ABRITES Commander for CHRYSLER / DODGE / JEEP” is a Windows PC based professional

diagnostic software for vehicles from the CHRYSLER / DODGE / JEEP group. With the help of

this software you can perform complete diagnostic operations of all CAN-based vehicles from the

CHRYSLER / DODGE / JEEP group, which are in most cases unsupported from the producer

diagnostic testers. The “ABRITES Commander for CHRYSLER / DODGE / JEEP” provides also

complete standard diagnostics (read faults, erase faults, current data, actuator tests) for


Our PC USB diagnostic interface currently supports K-Line and CAN-BUS interface.

Diagnostics is performed via the OBD-II connector.

The “ABRITES Commander for CHRYSLER / DODGE / JEEP” consists basically of two parts:

– Standard diagnostic functions like reading/clearing fault codes (DTC), scanning avalable

devices in the car, displaying actual values (measured parameters), performing actuator tests


– Special functions like Key Learning, Odometer Correction and Dump Tool.

All devices, which may be present in the car, are listed in the main screen of the “ABRITES

Commander for CHRYSLER / DODGE / JEEP”. If you want to connect to a specific device, please

double click on it or select it ant press the “Connect” button. The “ABRITES Commander for

CHRYSLER / DODGE / JEEP” will try to connect to the device.

The appropriate special function is opened by selecting it from the list box and double-clicking on

it, or by selecting it and then pressing the “Open” button.

SKIM means Sentry Key Immobilizer System. It prevents unauthorized operation of the vehicle by

disabling the engine. The system will shut the engine down after 2 seconds of running if an invalid

key is used to start the vehicle. This system utilizes ignition keys which have an electronic chip

(transponder) embedded into them. Only keys that have been programmed to the vehicle can be

used to start and operate the vehicle for more than the two second validation time period.

During normal operation, the Sentry Key Indicator light, located on the instrument panel upper

cover, will come on for 3 seconds immediately after the ignition is turned on for a bulb check.

Afterwards, if the bulb remains on solid, this indicates a problem with the electronics. If the bulb

begins to flash after the bulb check, this indicates that an invalid key has been used to start the

vehicle or there is a communication failure between the transponder and the Sentry Key

Immobilizer module. Both of these lamp conditions will result in the engine being shut down after 2

seconds of running. Keep in mind that a key which has not been programmed is also considered

an invalid key even if it is cut to fit the ignition for that vehicle.

For more infomation,please visit

Posted in car diagnostic tool | Tagged | Leave a comment

Autologic Vehicle Diagnostics Tool For BMW

Welcome to my blog,today i will introduce a new OBD2 Scanner product:Autologic Vehicle Diagnostics Tool For BMW,now it is sold in our shop

1. Autologic BMW MINI is included as part of the Autologic BMW software package or can be provided as a stand alone BMW MINI software.

2. Coding Individualisation & Programming (CIP) Software – Autologic is unique by being the only aftermarket diagnostic tool to offer coding and programming in one

3. Providing independent garages with the MOST – Programming time can be reduced by up to 60%* using Autologic’s Optical Interface compared to OBD II / J1962 connection

4. Retro Fitting components & conversions – Autologic delivers beyond dealer-level range of retrofitting and conversions.Country variant configuration – Autologic offers unparalleled configuring capabilities

Autologic Vehicle Diagnostics Tool

Autologic Vehicle Diagnostics Tool

Autologic Vehicle Diagnostics Tool

Autologic BMW gives independent garages the confidence to undertake any service and repair work required and enables independent garages to specialise without having to involve the dealer or call in outside help.

Autologic BMW is a genuine alternative to ‘GT1’, ‘SSS’, and ‘ISIS’, often providing quicker diagnostics, coding and programming than other BMW diagnostic tools.Additional features of Autologic BMW over other diagnostic tools include fitting aftermarket components and an increased number of retrofits.

Autologic BMW is easy to navigate. Information is displayed on a large touch-sensitive screen through a simple menu structure, supported by extensive help screens.


1. This One is Copy. It Can Not Be Updated.

2. Multiplexer Can Not Be Dismantled. Otherwise, It Will Be Not Under Warranty


Autologic BMW covers vehicles from 1986 onwards

Autologic BMW Mini covers vehicles from 2001 onwards

Full details on Autologic BMW and BMW MINI diagnostic capabilities are provided in the pdf documents

The Autologic diagnostic tool for BMW vehicles is without doubt the most comprehensive tool to be made available to independent BMW specialists.

Autologic BMW is unique in offering full fault code read and re-set, full component activation, electronic control unit procedures, clearing and setting of adaptation values, full coverage of (ECU) control units coding, full programming capability including engine control modules and transmission control modules, adjustment of engine idle, real-time reading of all dynamic data, procedure for engine and immobiliser alignment, procedure for trial substitution of control units and procedure for the fitting of BMW accessories. Car/Key Memory Function for personalising vehicle.

For more obd2 scanner,please visit our shop

Posted in Uncategorized | Leave a comment

Install Volvo Vida Dice Software

1.Insert the Volvo vida dice disk, automatically show the install screen. please click【viad all‐in‐on】start install. If this screen have not show up when you insert the disk, please do as step two show.

2.Find install file[setup.exe] under the file as the pic show, double click to open it, then you will see the install screen as the step 1 show.

3. click [ vida all‐in‐one] start install,click[next]

4.if show the pic as below show, please do as step 5 show change the computer system time and then restart computer and finish install.

5.Change computer system time back to 2008.11.1 then restart computer. Do again step 1 to 3.

6.install processing





12.Choose the start menu enter

13.Input the 16 pin connector of Volvo vida dice into the car,USB connect to the computer.System will install the drive automatically.

For more obd2 scanner,please visit

Posted in car diagnostic tool | Tagged | Leave a comment

DigiProg III introduction

Digiprog iii stability should be used to do the 12 volt power supply, if you use more than 13.5 volts, the power load on the machine Digiprog III, it may cause the circuit board to be burned, and then had to send it to your dealer for repairs digiprog

DO NOT use the cigar lighter lead when connected to a vehicle by OBD,Failure to observe will result in damage not covered by the warranty.

When your DigiProg is powered up, this screen will be displayed whilst your machine is loading:

digiprog 3

On this screen your DigiProg’s status/software version is displayed along with your machines unique 12 digit electronic serial number.

When your DigiProg has finished loading an information screen will appear with a disclaimer regarding the use of the machine. When you are ready, press the check/tick button.


The DigiProg will then ask for a password to be entered before the machine can be used. The default password is set to 1 but can be changed in the SETUP function see The setup menu

digiprog 3

Setup Menu

This menu is where settings on your DigiProg can be changed. Language, password, brightness, volume, and the time/date can all be set and changed in this menu. You can also change whether your machine is working in kilometres or miles

The remaining functions i will introduce the next article,by the way, welcome to our obd2,we providing our customers with a vast range of high-quality and affordable automobile maintenance tools,Our main business line covers: Automotive Professional Diagnostic Tools for OBD I and OBD II compliant vehicles; Auto Diagnostic tool, OBD2 Code Scanners, ECU Chip Tuning Tool, Car Key programmer Mileage Programmer as well as other more featured products.

Posted in Uncategorized | Leave a comment

Auto Diagnostic Explanation of terms

1 Automotive Technology Status: quantitative characterization of a time measured automotive appearance and performance parameters worth combined.

(2) Vehicle Inspection : Determine automotive technology position or ability to work checks.

3 diagnostic parameters : for diagnostic use, characterization cars, assembly and institutional technical condition parameters.

4 Diagnostic criteria: automotive diagnostic methods , limits and other technical requirements and uniform regulations.

5 diagnostic cycle : automotive diagnostic intervals to mileage or time representation ;

6 car inspection stations : in the automotive testing and institutional or corporate organizations.

7 No Load Dynamometer : Due to the dynamic dynamometer without external load applied to the engine so called no-load dynamometer .

8 Steady Dynamometer : refers to the engine throttle constant rotational speed and other parameters remain constant steady state, measured on the dynamometer engine power in a way.

9 piezoelectric effect : when the piezoelectric material is subjected to external force , not only changes its geometry , and the internal polarization , the charge appears on the surface , forming an electric field ; when the external force is removed , it has returned to its original state . This phenomenon is called the piezoelectric effect .

10 The mean fully developed deceleration (FMDD):

11 Braking Time Coordinated : refers to slam the brakes, from the foot touches the brake pedal ( or hand touches the brake lever ) until the vehicle deceleration time ( or braking force ) achieved mean fully reduced vehicle speed (or the required braking force ) required for 75% of the time .

12 . Braking distance: means beginning at a predetermined vehicle speed when the brake pedal ME , from foot touches the brake pedal until the vehicle stops upon, the vehicle passing in the distance.

13 Wheels static unbalance : support from the axle , adjust the tightness of wheel bearings , gently turn the wheels , making it the natural stop. If you mark the end of each test are parked in the nearest place from the ground , then the wheel static unbalance .

14 Wheels dynamic imbalance : the mass distribution of the wheel relative to the longitudinal center plane of the wheel caused by asymmetry .

Posted in car diagnostic tool | Tagged , | Leave a comment

X-VCI Porsche Piwis 1 review

In the non-disintegration (or just remove the individual parts) under the conditions determined car technical condition, failure to identify the location and cause of the inspection. Including the detection and diagnosis of automotive engine, chassis detection and diagnosis, auto body and accessories as well as the detection and diagnosis of vehicle exhaust pollutants and noise detection and so on.

Xtool X-VCI box not only support J2534 reprogramming, but it is also the device of OEM scan. J2534 is the har-dware standard for OEM scan.Ford, Mazda, Landrover and Jaguar use J2534 standard for scan Xtooltech X-vci can work with many original diagnostic softwares, and same function as the original tools.

Xtool X-VCI box have arrived,if you need,please contact me,our skype:obd2works,and now the Xtool X-VCI box price $1,199.99.To buy the product,click the link:

X-VCI Prosche Piwis 1 Features

1. Same functions as porsche kts520
2. Fucntion: Diagnosis + Programming + key copier
3. Car testing year: From 1996 to 2010
4. Software version: V29
5. Update: HDD update

Protocol Support

RP1210A, RP1210B, and J2534 API support
Bluetooth vehicle-to-PC wireless connectivity
USB vehicle-to-PC connectivity
Protocol coverage for automotive to heavy duty vehicles:
CAN – J1939/CAN125/CAN250/CAN500/CAN1000
2nd CAN – J1939/CAN125/CAN250/CAN500/CAN1000
Automatic bit rate detection for both CAN channels
ISO 15765 (Diagnostic CAN)
ISO 14230 (KWP2000 over ISO9141)

For more car diagnostic scanner,please visit our shop obd2works.

Posted in Uncategorized | Tagged , | Leave a comment